Model numbers SA2361E (208-230v/3ph/60hz/1hp), SA4361E (230\460v/3ph/60hz/1hp) and SA6361E (600v/3ph/60hz/1hp). The fan comes with the “Extended/Adjustable hanging elevation kit” and the “Extended/adjustable oscillation kit”.
NOW INCLUDES: Safety Cable Kit
Single Phase Control Option
Variable Speed Control (VSC-110V): $1965.00 (1) fan
Now you can install your SonicAire fan without hiring an electrician.You simply mount the VSC-110V on a wall near an electrical outlet and near the location of your ceiling hung SonicAire fan. VSC-110V comes with a 10ft 110V power cord and a 50ft power cable with twist lock plug to connect to power cord from SonicAire fan.
Three Phase Control Options (Multiple Fans)
Contact IES for a quote on a custom panel to fit your needs with any of the following options below.
Automatic Control Panel Timer (ACT):
Want to run the fans only when the facility is empty, or for only a few hours per day? With this option, you can choose whatever works for your operation, and implement it with one simple setting. It comes with an ON/OFF/AUTO manual override switch.
Variable Speed Control (VSC):
SonicAire fans can clean or cool with this option. Change the speed of the fan to suit your needs-lower speed to provide good air circulation for employees. Run fans at full speed for cleaning.
Emergency & Fire Control (EFC):
If a fire alarm system detects a fire in the facility, the EFC will automatically turn OFF all SonicAire fans.
Lock Out/Tag Out (LOTO):
This locks out and tags out a group of fans for maintenance.
Local Controls
Local Disconnect Switch (LDS): $135.00
The LDS is a manual three phase switch with built in short circuit and overload protection. The switch comes with a compact enclosure and an e-stop button.
Reverse Control Kit (RCK): $766.00
The RCK enables you to reduce the angle of rotation to less than 360 degrees. If you need to prevent the SonicAire fan from cleaning a certain area of your plant the RCK can be set to clean from 30 degrees to 360 degrees of rotation.
Mounting Options
Universal Mounting Platform (UMP): $121.00
The UMP mechanically attaches to overhead flanged steel. The UMP comes with (2) beam clamps to attach the plate to a flanged steel member and (2) beam clamps to attach the two sway braces to a flanged steel member.
Bottom Support Hub (BSH): $180.00
The ‘BSH’ enables an owner to floor mount a SonicAire fan or ceiling mount a SonicAire fan upside down to get the discharge higher off the floor.
Bar Joist Support Strut (BJS2): $165.00
The BJS enables you to hang the SonicAire fan at the maximum elevation above the floor. If the bottom of your bar joist is less than 12 feet from the floor, then the BJS should be used for mounting your SonicAire fan.
Vertical Mounting Support (VMS): $440.00
The VMS enables an owner to hang a SonicAire fan from a vertical support structure such as a column or wall. The VMS cantilevers the SonicAire fan away from the column or wall.
Vertical Adjustable Support (VAS): $395.00
The VAS enables an owner to hang a SonicAire fan from a vertical support structure that is tapered, such as a structural concrete pan or beam roof support. (4) 1/2" Bolts are used to secure the support plate to the facilities support beam or pan.
Perlin Mounting Support (PMS): $121.00
The PMS enables an owner to hang a SonicAire fan from two roof purloins on a metal building structure. There are two variations of the PMS. The level PMS and the slopping PMS.
Stradle Mounting Support (SMS): $121.00
The SMS enable an owner to hang a SonicAire fan from a wood truss or beam without using lag bolts or drilling a hole through the beam.
Inclined Beam Mount (IBM): $295.00
The IBM is customized for surfaces such as inclined roof trusses and metal building support beams.
Safety Equipment
Safety Cable Kit (SCK): $135.00
The SCK provides a secondary support for the hanging SonicAire fan. In addition to the support tube, the SCK provides two additional steel cable connections from the SonicAire fan to an overhead support structure.
Fan Guard Kit (FGK): $185.00
The ‘FGK’ provides protection from a person accidentally putting their hand into a fan or getting a garment into the fan. The ‘FGK’ is OSHA required if you will be mounting your fan discharge under 8’ 6” above the floor.
Standard SuperSonicAire: $9,700.00
Model number SSA1161 (110v/1ph60hz/1hp). The SSA gives the owner the benefits of portability, versatility and simplicity. Simple move the fan to your desired location and set it up for either automatic cleaning at night or manual cooling or destratification during the day. Simply plug it into any 115v outlet.
Tilting SuperSonicAire: $12,650.00
RMF Water Filter and optional pricing
Model No. 50x60-100: $6,700.00
19 5/8" D x 28 3/8" L; rated for 440 GPM @ 30 mesh (see chart for other conditions)
Model No. 50x90-150: $6,960.00
19 5/8" D x 35 3/8" L; rated for 660 GPM @ 30 mesh (see chart for other conditions)
Model No. 50x112-200: $7,250.00
19 5/8" D x 44 1/8" L; rated for 880 GPM @ 30 mesh (see chart for other conditions)
Model No. 50x122-250: $7,430.00
19 5/8" D x 48" L; rated for 1100 GPM @ 30 mesh (see chart for other conditions)
Control panel to control regeneration cycle: $585.00
